Page 1 of 1

Some body help

PostPosted: Wed May 21, 2008 1:08 pm
by MidNightSun
I have a psp-1001 model with firmware 3.95. I was wondering how to get a custom firmware onto my psp as easily as possible.

PostPosted: Wed May 21, 2008 1:11 pm
by DarkPacMan77
Follow the links in my signature. Other than that, please post help questions in the Help section from now on. Thanks ;)

~moved to Help~

-DarkPacMan77-

PostPosted: Wed May 21, 2008 1:13 pm
by Steeler12
I just posted this to your other reply... but this is the easiest way

Well, unfortunately the only option for you is the Use of a Pandora battery and Magic memory stick combo. There are many tutorials on this site on how to make them, and it isn't too difficult, but it requires a little bit of time. Basically you need a battery, and another PSP capable of homebrew, and a memory stick greater than or equal to 128mb and less than or equal to 1gb. You will use the Homebrew enabled psp to create a special battery, and you will make a memory stick so that when both are placed in your PSP simultaneously, a special screen will Pop up and give you a few options. One will say "Install Custom Firmware ____" another will allow you to install the Official Firmware equivalent. Then you choose the Custom Firmware, it will install and bingo you have it.

heres a link to a good Pandora creation Tutorial. http://www.pspbrew.com/forum/viewtopic.php?t=9208

if you dont have access to someone or another psp that already is "modded" then you need to follow the tutorial for how to get CFW without a 2nd psp

PostPosted: Wed May 21, 2008 1:24 pm
by ace
Dangit dpm what did I tell you about moving duplicate posts! :p

Don't double post..erm..double thread k? Its against teh rulerz