Page 1 of 1

little bit of devhook help

PostPosted: Sat Oct 07, 2006 11:23 pm
by jaymil2386
What's up guys? I recently installed devhook 0.46 to my psp with 2.71 firmware, but every iso that i've tried to run doesn't work. I used a devhook full installer and the setting i used are as follows:

UMD-MODE: Image+ANYMUD
Firmware: 2.71
cpu clock: 222 MHz
boot select: reboot xmb

I didn't really mess with the other settings that much and my firmware right now is 1.5. Do I have to upgrade it to 2.71 or is there something else that i'm missing? Any help will be greatly appreciated.

PostPosted: Sun Oct 08, 2006 9:13 am
by Mailas
Please do not update. Thats the last thing that you need to do.
This is what yuo're settings should be if you are to boot in 2.71 firmware with a UMD game:

UMD SELECT: UMD Disc
UMD MOUNT:UMD DISC
UMD VERSION: no change
FIRMWARE: 2.71(MS hook)
CPU CLOCK: 222 Mhz (333 if need of smoothness, but messes with networks functions, see T08 about this)
BOOT SELECT: Reboot XMB
PL-ADR: 89000000 (in: OTHER/preload address menu)



If you are booting a backed-up ISO game:


UMD SELECT: select your ISO
UMD MOUNT: ISO ANYUMD
UMD VERSION: no change
FIRMWARE: 2.71(MS hook)
CPU CLOCK: 222 Mhz (333 if experiencing lag but network functions will have issues, see T08 about this)
BOOT SELECT: Reboot XMB
PL-ADR: 89000000 (in: OTHER/preload address menu)



Double check you're settings, and make sure you always have a UMD in the drive for it to boot.