; This config file is optional, if you want to just use the defaults you do not
; require this file


; FatDevice : If set it will skip wad manager source select and always load ; this device
; default is disabled, set =sd, usb, smb, gcsda, or gcsdb to skip the select ; menu 
;FatDevice=sd

; StartupPath : If set when loading wad manager it will load this path instead
; of device:/
; default is disabled, set ="default path"
;StartupPath=/wad

; AutoLoadIOS : Auto Load this IOS at start of app(This will make you lose
; AHBPROT)
; default =0(disabled), set =The IOS you want to load(ex 236 if you want to
; load IOS 236 at start) To disable either comment out the line with a ';'
; or set =0
AutoLoadIOS=0

; AutoLoadOnInstall : If the AutoLoadIOS is not installed when it is should
; Wii Mod reload AutoLoadIOS?
; default =0(disabled), set =1 to reload the AutoLoadIOS when it is installed
; To disable either comment out the line with a ';' or set =0
AutoLoadOnInstall=0

; DisableSetAHBPROT : The new SetAHBPROT patch has a downside, it causes usb
; drives to not load. So this option allows you to disable the patch to
; reenable usb functionality.
; default =0, set =1 to disable SetAHBPROT patch and fix usb
DisableSetAHBPROT=0

; DisableControllerButtonHold : Disables reacting to buttons being held down. So you
; have to press the wiimote dpad for every movement through the menu.
; default =0, set =1 to disable button hold
DisableControllerButtonHold=0

; DeleteDefaultInsteadRemove : Change delete ios method when higher version is
; found during install. When installing an IOS over a clean IOS with a higher
; version the default action now is to try to change the version and then
; install over it with the new IOS. This option switches the default behavior
; back to just deleting the ios.
; default =0, set =1 to override default
; To disable either comment out the line with a ';' or set =0
DeleteDefaultInsteadRemove=0

; outputios : Save IOS details to csv after each checking of all IOSs
; default =1, set =0 to disable saving to csv
outputios=1

; loadoldcsv : load IOS details saved from previous run( useful for AHBPROT
; mode )
; default =1, set =0 to disable loading from csv
loadoldcsv=1

; printiosdetails : Print IOS details in IOS menu
; default =1, set =0 to disable showing IOS details
printiosdetails=1

; filterwads : In wadmanager filter files to only wads
; default =1, set =0 to disable filter other file types
filterwads=1

; onlyCheckIOSOnDemand: By default throughout Wii Mod (after wad installs,
; mass installs, and such) Check IOS will run to get the patch info on your
; installed IOSs. This option disables this so it only runs when run manually
; from the  main menu.
; default =0, set =1 to disable auto check IOS and only run on demand
onlyCheckIOSOnDemand=0

; smb settings : set username password ip address and sharename here
; Here is an example config if you had a share at \\192.168.1.100\wad
; with username "user" and password "password".
;SMB_USER=user
;SMB_PWD=password
;SMB_SHARE=wad
;SMB_IP=192.168.1.100

; skipios : Sometimes loading an ios will error or leave the app(nandemu)
; which is a problem for check ios, so this option allows you to blacklist IOS
; numbers so that they aren't loaded during check ios. You can also have more
; than one set so for example
;skipios=253
;skipios=254
; these two would skip checking sorg's nandemu and bootmii. Note: the app
; already skips these two IOSs so you shouldn't enable these examples.

; skiphash : This option is similar to skipios but instead of blacklisting a
; number like 254, this option blacklists a particular hash. You can get hashes
; of IOSs by disabling the checking IOS and enabling dump hash on the check IOS
; menu. You can also have more than one set.
; so for example
;skiphash=58c5d8b1,ccaa035b,14d3e159,3209c037,a915552a
;skiphash=e7db8c44,b68964e1,6debfc12,78d6b148,117a4cf8
; these two would skip checking sorg's nandemu and bootmii. Note: the app
; already skips these two IOSs so you shouldn't enable these examples.
